10-inch UCG Ultra / Max mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My attempt at a 10 inch mount for the UCG-U and UCG-M
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
My attempt to make a rack mount for the UCG Ultra / Max routers.
it fits with and without the little feet you get with the router, but the router slides easy if you don't have them on!
2 semi good fitting keystone jacks on each side, if anyone wants a could put down the effort to make one without the keystones.
Designed to be printed with no supports, as long as your filament and printer can handle 15mm bridges.
I printed mine on a P1S with Formfutura ASA with 0.2mm. Should be printed “face” down
.f3d .3mf and a .stl is available to download. happy printing!
Edit: Fixed a small error in the model file
Edit 2: Spelling error xD