1 / 3
motor moount for the Volantex Phoenix 2000 v1 rc glider — zdjęcie 1
1 / 3

motor moount for the Volantex Phoenix 2000 v1 rc glider

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After crashing my v1 volantex 2000 i decided to design a simple motor mount. Here it is...

Ocena
0 / 5
Polubienia
4
Pobrania
43
Wydruki
0
Wyświetlenia
605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This motor mount was created to be easy to print and mount. After printing, scratch the outer 1mm of the print, apply hot glue and stick in the nose of the aircraft.

It has been tested with the t-motor 2814 and 2820 motors. make sure to route the motor wires away from the motor in order to prevent them getting caught.

I suggest printing in high temperature plastics such as ABS/PETG to prevent the mount from melting.

Tagi