3-way collector suction/3-Wege-Sammelabsaugung 3x75mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of the great 3-way blast gate from @eddRX
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
remix of the great 3-way blast gate from
https://www.printables.com/@eddRX
https://www.printables.com/model/695261-3-way-blast-gate-for-festool-hoses
if the main part is printed as a whole, supports are necessary.
I added the optional cover because removing the support structures left an unsightly surface on the stand flange.
There is also a counterpart that can be inserted into the main part from underneath a 27mm thick workbench. This part could then be connected, for example, to adapters in the desired hose diameter.
The whole thing is very solid (wall thickness of the connecting pipes approx. 4.5mm) and you need a lot of filament accordingly…
Tip: Depending on the desired smoothness of the slide, reducing the slide thickness so that they are not clamped - slide and spacer models currently have the same thickness of 4mm .