Powerbox Core/Atom Slider/Knob brake bearing for sliders or rotary knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Guys, what do you think of an even simpler solution, a much better steering feel when the escapement is active, even more finely adjustable with a metal clamp and all of this done by just replacing a single component 1:1?
In the morning in the shower (I should use that more often) I had an idea to throw the previous principle of the rotary encoder and slider escapement overboard and find a solution using a different approach. May I introduce: the roller bearing.
I have now found the exact size for the characteristics we wanted. This roller bearing is simply replaced by the plastic ball bearing in the Hall sensor housing - that's it!
I have found a plastic mixture through trial and error that supports the axle more than sufficiently radially and axially and keeps everything in place and has the desired escapement characteristics. This solution works with this plastic almost wear-free.
You are probably confused that I have nevertheless developed the escapement discs further. The reason is relatively simple: it took a long time to figure out the perfect dimensions of the component and the printing parameters required for it, and it didn't work at first. Today I had another good idea, printed the prototype, installed it, and voila - this is exactly how I imagine a completely functional and durable solution. The original plastic bearing is simply levered out with a fine screwdriver and replaced with the roller bearing. The original state can be restored at any time without leaving a trace!
The adjustment using the clamp remains completely the same - screw it tight on the right and adjust the escapement and center detent on the left. If the clamp no longer provides enough preload, simply carefully bend it back into shape a little, it works wonders once you've played around with it a bit.
Print with TPU of Shore A-95 at least. Otherwise this solution doesnt work!
Disclaimer
You use this design on your own risk! Im not responsible for any damages or injuries due the lack of observing what you do or in which shape/condition your transmitter is! Please do not download or use if you are not agreeing this!