FAAC XT2 Motorcycle box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for FAAC XT2 remote, secured with M3 screws and zip ties. Sealed with silicone for water protection.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This 3D model is designed to connect buttons to my motorcycle's handlebars and to house the FAAC XT2 remote control in a compact enclosure. The enclosure provides space for the controller’s mainboard and two batteries that power it. The design is optimized for easy installation and protection of the electronics from external influences.
For a more secure closure, the enclosure is fastened with six M3 screws, with recesses on the opposite side for nuts. Additionally, the enclosure features slots for electrician’s zip ties, allowing for easy attachment to the motorcycle frame or another suitable location. To improve water resistance, I sealed the joint with silicone.