Shockflyer module for RC plane wall storage system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Addition to the wall storage system, a holder especially for shockflyers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an addition to my RC plane modular wall storage system. To make use of these files, you must as well download the basic files found under the above link.
These are special holders for shockflyers/parkflyers with a maximum weight of about 600 g. According to this, the construction is much lighter (and thus material-saving) compared to the other model holders, yet offers an extended wall offset of 105 mm, thus extending the space for the fuselage.
Intended for models without a landing gear, but can in many cases be used with the model's canopy facing the wall (otherwise use a pair of wheel holders).
As usual, find details in the attached PDF manual. I've updated the manual on the system's main page as well, but also attached it here so you don't have to go back to the main page unless you need the STL files from there.