K&F Concept 3-Way Geared Tripod Head | Replacement Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K&F doesn’t sell replacement parts, so I designed a 3D-printed gear to fix a broken tripod head instead of replacing it
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
Replacement Gear for K&F Concept Geared Tripod Head
Overview
If you've been using the K&F Concept geared tripod head, you may have experienced a common issue—broken or worn-out gears. Unfortunately, K&F does not sell replacement parts, meaning you're forced to buy an entirely new tripod head if a single component fails. Instead of spending extra money, I designed a custom 3D-printable replacement gear to get it working again.
Problem & Solution
The original gear consists of an aluminum core with plastic teeth, but over time, the plastic can crack and fail. Since K&F doesn't offer replacements, I designed a fully 3D-printable version to restore functionality. While this part is entirely plastic and may not be as strong as the original, it’s easy to print another one if needed.
Features
- Exact Fit: Designed to match the original gear’s dimensions for a smooth installation.
- Easy to Print: Works well with FDM and resin printing.
- Affordable Fix: Instead of replacing the entire tripod head, just swap out the gear!
Printing Recommendations
- Material: PETG or ABS for durability.
- Layer Height: 0.2mm
- Infill: 100% for maximum strength
- Supports: Organic supports from the build plate
- Print Orientation: Vertical for best accuracy
Installation Guide
- Cut a Hole in the Label
- The screw holding the broken gear in place is hidden under the label on the tripod head. You’ll need to carefully cut a hole in the label to access it.
- Remove the Broken Gear
- Disassemble the geared mechanism and carefully remove the damaged gear.
- Print & Clean the New Gear
- Ensure there are no print artifacts or warping.
- Grease the New Gear
- Before reassembling, apply a small amount of grease to the new gear to reduce friction and improve longevity.
- Install the Replacement Gear
- Align it with the drive shaft and secure it in place.
- Test for Smooth Operation
- Rotate the knobs to confirm everything moves smoothly.
Final Thoughts
Since K&F doesn’t sell individual replacement parts, this printable gear provides an easy and cost-effective way to repair your tripod head. While it may not be as strong as the original, it’s quick to reprint if needed. Don’t forget to grease the gear during reassembly for smoother operation. If you find this useful, please share your results and feedback!