1 / 5
Extra strong phone holder for the BMW r1200gs motorcycle — zdjęcie 1
1 / 5

Extra strong phone holder for the BMW r1200gs motorcycle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

By screwing in the M8 screw, we clamp the phone. It is best for phones with a width of 79 mm and a little more.

Ocena
4 / 5
Polubienia
16
Pobrania
95
Wydruki
1
Wyświetlenia
1093
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

The holder is attached like a clamp to the factory reinforcement for mounting navigation on a BMW r1200GS motorcycle or any other tube with a diameter of 16 mm. By screwing in the M8 screw, we clamp the phone in the holder. The screw thread is made of plastic and the springs used prevent the handle from loosening, the 35mm deep thread guarantees long service life. Thanks to the structure consisting of several elements and symmetrical mounting, the phone can be placed vertically or horizontally when folded. 

The holder is designed in such a way that there is no need to use supports during printing, all elements will print correctly when properly positioned on the table. 

Additionally, the project requires:
-4x Allen key screw M6x35,
-4x M6 nut (preferably self-locking),
-hexagonal screw M8x45,
-2x compression spring 8x0.8x40 

Petg filament and 100% infill are recommended for printing; Pla material can be used, but it will be more sensitive to weather conditions.

 

Uchwyt jest mocowany na zasadzie obejmy na fabryczne wzmocnienie do montażu nawigacji w motocyklu BMW r1200GS lub każdą inną rurkę o średnicy 16mm. Wkręcając śrubę m8 zaciskamy telefon w uchwycie. Gwint śruby wykonany z plastiku oraz zastosowane sprężyny zapobiegają luzowaniu się uchwytu, gwint o głębokości 35mm gwarantuję długą żywotność. Dzięki składającej się z kilku elementów konstrukcji i symetrycznemu mocowaniu, przy składaniu można ustawić telefon pionowo lub w poziomie. 

Uchwyt jest zaprojektowany w taki sposób aby nie było konieczności stosowania podpór podczas drukowania, wszystkie elementy przy odpowiednim ustawieniu na stole wydrukują się poprawnie. 
Dodatkowo do projektu niezbędne są:
-4x śruba na klucz imbusowy m6x35,
-4x nakrętka M6 (najlepiej samo kontrujące),
-śruba sześciokątna M8x45,
-2x sprężyna naciskowa 8x0,8x40 

Do wydruku zalecany jest filament Petg i wypełnienie 100%, można zastosować materiał Pla ale będzie on bardziej wrażliwy na warunki atmosferyczne.  

Tagi