HAPATA 5 Open Source FPV Drone Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 120g 5" open source drone frame with support for 30x30mm and 20x20mm drone stacks.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 1179
- Wydruki
- 0
- Wyświetlenia
- 4245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I looked at a lot of frame reviews and tried to incorporate many design features that I liked into one drone frame.
I recommend test printing it to see if your components will fit first as it is a fairly tight build.
If slicing use the split to objects button to separate all the pieces.
Hardware:
4x M3x18mm button head screws (can be 14-20mm length)
2x M3x15mm button head
4x M3x28mm button head for stack
4x M3x10mm button head
8x M3x8mm countersunk screws
6x M3x20mm standoffs (max 6mm diameter)
2x M3x28mm standoffs (max 6mm diameter)
Minimum 6x M3 clinch/press-fit nuts
If you have any suggestions please let me know and make sure to post your builds here too
Onshape link if you want to make any changes:
If you downloaded from the onshape link, make sure to download on printables too :)