Mazda CX-5 Dead Pedal Cover

I made this ‘dead pedal” cover for our CX-5 since the floor mats do not cover the dead pedal. The carpet in the CX-5 is known to wear quickly if you put your foot on the dead pedal. This should fit 2017+ models. I cannot verify if it fits any other Mazda models.

There are two designs each having two variations:

1. Flat dead pedal with a flat mounting surface if you want to use spray adhesive for attachment.
2. Flat dead pedal with shallow recesses in the mounting surface for using 0.75” wide Velcro to attach to the carpet. 
3. Dead pedal with a corner wrap and a flat mounting surface for the right side of the dead pedal. The corner wrap is to provide protection for the right edge of the dead pedal.
4. Dead pedal with a corner wrap and shallow recesses in the mounting surface for the right side of the dead pedal. The corner wrap is to provide protection for the right edge of the dead pedal.

Printing instructions:

• Two plates are in the print profile. One with the designs for using Velcro and one with designs for using spray adhesive.
• TPU is highly recommended to provide the grip and cushion.
• 0.20mm layer height
• 0.4mm nozzle
• 3 walls
• 0 bottom layers if you want to use the infill pattern as the outer surface. I used the hexagon infill pattern but you can try other patterns if you wish.
• 15% infill
• No support required.