1 / 2
Geared Altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel — zdjęcie 1
1 / 2

Geared Altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the left bearing on the Hadley, metric version with M4 bolts, and large manual control wheel.

Ocena
0 / 5
Polubienia
17
Pobrania
90
Wydruki
0
Wyświetlenia
647
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An easier way to control the altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel, compared to the last remixes.

Print the same as the other parts of your Hadley. You will have to make an axis in your mount; I've used an M4x50mm bolt and nyloc nut through the Sturdy mount by Ivan Urbánek, which fits very well.

It does require some support this way, so if you don't like that you may want to pick a different version.

Tagi