Remix Fake nut with internal magnet and keeper.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of just the nut.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a redesign of just the nut. I have had some of these out in the field for 14 months now and what I have found is that no matter the glue I use the magnets always come loose. So I redesigned the nut to use 2 10mm x 2mm magnets internally with a friction fit keeper.
This is designed for printing in ABS since it seems hardier out in weather compared to PLA. Since abs does not use a part cooling fan there may be some slight sag. I have increased the dimensions of the magnet channel to compensate.Print with Threads facing up.
based on this original design
https://www.thingiverse.com/thing:639602
Print instructions
Category: Sport & Outdoors Print Settings
Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 V2
Rafts: No
Supports: No
Resolution: 200
Infill: 15% with 2 steps (cura 2.6.2)
Notes:
Designed for ABS. May not work if printed in PLA.
Print with Threads facing up