Tupperware lid holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My wife was looking for a lid holder for all her lids. i couldn't find one here so i decided to model my own.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 245
- Wydruki
- 1
- Wyświetlenia
- 2515
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
My wife was looking for a lid holder for all her lids. i couldn't find one here so i decided to model my own. I iterated it 4 times so far. the Holey version is the latest, it prints the fastest, and uses the least filament.
tinker links if you want to play with the design some
https://www.tinkercad.com/things/j7G3zqEOy3z-copy-of-half-solid-lid-holder
https://www.tinkercad.com/things/i4F4A8DmSw4-copy-of-holey-lid-holder
https://www.tinkercad.com/things/79Ti1WMC9mO-copy-of-solid-lid-holder
https://www.tinkercad.com/things/hSUdITWw0na-copy-of-holey-lid-holder-2
Print instructions
Category: DIY Print Settings
Printer Brand: Wanhao
Printer: Wanhao Duplicator i3 V2
Rafts: No
Supports: No
Resolution: 200
Infill: 20
Notes:
printing the half solid was nerve-wracking for my as that 2 mm x 15 mm tower does not connect until it is way way up in the air. I would probably print either the solid or holey in the future and skip the half. For the smallest lids I'd use a 2.5" gap for the largest lids I used a 3.5"
To print two you will want to use the mirror function in your slicing software to create the second side