1 / 3
Cactus Passthrough
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple, cactus passthrough! Print for lots of fun!
Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.
Main settings:
- .2mm layer height.
- A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
- No supports
- 15% Gyroid infill for both objects.
- 2 perimeters(walls).
- Colour change at layer 30.20(if you're following step 1).
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :)
Category: Toys & Games