1 / 4
BMW Airhead Engine Block Connecting Rod Cylinder Clip-On Protector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ditch the zip-ties and rubber bands when working on your Airhead's top end and protect your engine case from dings.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ditch the zip-ties and rubber bands for this slightly more refined solution to protecting your crankcase during top end work.
These projectors quickly clip on and off of the engine studs when performing top end work to protect your engine case from getting dinged or nicked by the connecting rod.
There are two versions one:
- A 97mm diameter cylinder spigot version for airhead engines produced from 1970 to 1975
- A 99mm diameter cylinder spigot version for engines produced from 1975 to 1996
I printed these in PETG at 15% Infill on a Bambu X1C