1 / 2
Air Conditioner Fan Shroud Anti-Vibration Feet — zdjęcie 1
1 / 2

Air Conditioner Fan Shroud Anti-Vibration Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Air Conditioner Fan Shroud Anti-Vibration Feet

Tired of that annoying rattling sound coming from your air conditioning unit? These 3D-printed anti-vibration feet are designed to reduce noise and vibrations caused by a loose or vibrating fan shroud on your AC compressor.

Features:

  • Vibration Dampening: Helps stabilize the fan shroud, preventing unwanted noise and movement.
  • Easy Installation: Simply slip them under the shroud—no tools required!
  • Secure Fit: Designed to hold the shroud firmly while keeping it elevated just enough to prevent rattling.
  • Durable & Weather-Resistant: Can be printed in PETG, ASA, or ABS for long-lasting outdoor use.
  • Universal Fit: Works with many air conditioning compressor models with metal fan shroud covers.

Printing Recommendations:

  • Material: PETG, ASA, or ABS for outdoor durability (PLA may degrade in heat/sunlight)
  • Layer Height: 0.2mm for a clean finish
  • Infill: 20-30% for strength
  • Supports: Not needed

Why You Need This:

If you’ve ever noticed your AC making excessive noise, especially from the metal fan shroud vibrating, these simple but effective feet will eliminate the problem in minutes. Just print, install, and enjoy a quieter air conditioner!

You might need to scale these to meet your needs!  Print 1 and test the size you need, then print more.  You can pry the fan shroud out a bit with a screwdriver and slip these in place.  Or you can loosen the fan shroud bolts and place them under each leg.

These definitely helped reduce the vibration noise from my A/C motor fan!

Tagi