Lilygo T3S3 Enclosure for Blackout Comms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an enclosure designed for Blackout Comms links/nodes based on the T3S3 by Lilygo.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 1316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Lilygo T3S3 Enclosure for Blackout Comms (or whatever)
This is an enclosure for the Lilygo T3S3. I designed it to enclose the T3S3 for nodes within my personal Blackout Comms off-grid mesh comms cluster. However, it can probably work for whatever else you'd want to build on this dev board.
You will need M2 knurled nuts to melt into the case back and M2 screws (see the assembly instructions PDF for links). Other than that, this case is pretty straightforward.
I designed it so if you print as oriented in the all-in-one 3mf file, you will have very little waste and almost no filament to cleanup after the print.
- Designed for a Blackout Comms link, but usable for whatever else runs on t3s3
- SMA connector and USB port are accessible
- Stable enough to leave free-standing
- Built-in brackets allow mounting with velcro straps/etc
- Enough space for a 2000 mAh LiPo battery (LP103454).
- Area in the upper corner for a DS3231 realtime clock or GPS antenna
Printable Files
mini_node_full.3mf or mini_node_full.stl - This one file contains all the printable items.
Other Files
I also included instructions for building and flashing a mesh node, as well as a user guide, but if you're not building a Blackout Comms node, you won't need those.