1 / 8
Harley Davidson RG3 & Freewheeler License Plate Frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
License plate relocation kit for Harley Davidson RG3/Freewheeler. A laydown bracket and LED lights will be needed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
- This part allows the license plate to be moved to the back of the trunk. It attaches to a standard Harley Davidson laydown license plate mount bracket available from Amazon (see picture). The two LED lights are also available from Amazon. All attachment screws/bolt files are included, along with two tools to help with the installation.
- Frame is best printed from ASA or PETG and should be painted for UV protection in the case of PETG or if a smoother finish is required, or for a colour match.
- Spacer plate has been provided in order to set correct gap between frame and trunk (if needed). Adjust the thickness of this plate (Z height scale) as required.
- Adjust the X/Y/Z scale (uniform scaling) to get the Nut Spanner to fit over the ¼-20 Nut as required. It will be required for installing the top two bolts/nuts due to limited space.
- The M6 nut is for the LED lights.
- The prints in the picture were made using a Bambu Lab P1S and Creality CR-PETG filament (1.75mm).
- Update: have added a laydown mount bracket that obviates the need to purchase one. This same bracket can also be used with the Custome Dynamics license plate frame. The bracket shim (TPU) is placed between the bracket and the trunk.
Bolts/Nuts - use 0.12 layer height, 3 walls, 25% infill
Frame - use 0.2mm layer height (or smaller), 3 walls, 25% infill
Laydown Bracket - use use 0.2mm layer height (or smaller), 3 walls (or more), 50% infill
Shim - use TPU (80A best), use use 0.2mm layer height, 3 walls, 15% infill
Tools - use 0.24mm layer height , minimum 3 walls, 50% infill