Flagpole top and bottom swivel sets plus caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top and bottom flagpole swivels sets with three example caps. For use with 1" diameter flagpoles.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Top and bottom swivels sets for use with 1" diameter flagpoles, with three example caps.
Includes Fusion 360 source files (.fd3) and .stl files.
The swivel set pieces are printed twice; once for the top of the flagpole to secure the top of the flag, and once for the middle of the flagpole to secure the bottom of the flag. The cap simply fits into the swivel set at the top of the flagpole.
For best results, attach the swivels sets to the flagpole with the bolt facing up at the top of the flag and the bolt facing down at the bottom of the flag.
Suggested printing material is PTEG with a 25% infill. The swivel sets don't require a brim or supports, supports for the build plate only are suggested for the cap.
Additional hardware needed:
2 x ¼ inch bolts ½ inch long
2 x ¼ inch nuts
2 x flag clips
Edit: I also added a round split metal key ring between each print and flag clip, this further helped prevent the flag from wrapping around the pole on windy days