Stand for two Smiirl Counters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for two Smiirl Counters. The stand has cutouts to run network cables through.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
The Smiirl stand is available in two versions. One is an older version that I shared on Thingiverse a few years ago, and the other is a new version.
The stand is suitable for two counters with either 5 digits or 7 digits. The stand has cutouts to connect each Smiirl Counter to a network cable.
In the older version, the hooks for the counters are included in the model and must be printed together with it. In the new version, there are 4-millimeter holes instead of hooks, into which M4 screws can be inserted. This construction is more stable, and the version for screws also requires no support during printing.
For printing, I recommend using PETG because the material has some flexibility. It also works with PLA, but in that case, I would recommend choosing the version with screws.