1 / 1
Breville Barista Express steam lever extension (NO SUPPORTS)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extension lever that makes the steam and hot water easier to actuate.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 8)Remiksy (0)Kolekcje (18)Powiązane
Had many issues actuating the steam with my left hand while I was holding the milk cup with my right. I made this that sits at 45 degrees when in the middle “off” position, Vertical for hot water, horizontal for steam. I printed this with the flat side you see in the pic parallel on the bed.
Printed with no supports, 3 walls, 15% infill
Attached is a link to a youtube video detailing how to install this lever: