Removeable Wall Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a removeable wall shelf with no visible screws
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a removeable wall shelf with no visible screws, You can Slide the entire shelf and remove it if not needed. only the attachments will be stuck on the wall which don't look so bad. (Working something else to attach to those)
Use 4x M4 12mm or 10mm screws
You will mostly require a drill machine
I printed this at 0.3mm layer height
20-25% infill is fine
Print with flat sides on the bed for both the parts
Use supports for the leg attachment and keep the flat side on the bed*. (last image for reference)
The all white one (2nd image) is the first version that i printed with ASA. It warped like hell but still works perfectly.
Did some changes to the second one and printed it with PLA which didn't warp at all so it gave a perfect flush look