QuattroBox Filamentalist idler spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12mm spacer to widen a 80mm Filamentalist idler roller to fit the QuattroBox.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 876
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This is a small adapter spacer to widen the idler Filamentalist 80mm idler roller to fit the QuattroBox MMU.
I had already printed idler rollers for the Filamentalist Rewinder and it felt unnecessary to print new male and female ones for the Quattrobox so I designed a spacer to go in between the halves to make the idler roller the correct width.
Filamentalist 80mm idler is 74mm and the QuattroBox idler is 86mm so my adapter is 12mm.
I used the Filamentalist cad and cut of the threads from each half of the idler roller. I then moved one thread part 12mm and extruded the space between them to make the spacer.
Print with the wide side down.