Protector for USB to SATA adapter and a disk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protector for USB to SATA adapter from Inateck / Aplic or similar and a 2.5" SDD
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you use a usb to sata adapter and a disk more permanently, but still not permanently enough to use a real disk case, this thingy might be for you.
The protector is for adapters branded Inateck or Aplic or maybe others. See photos for reference (size 7.2 x 3 x 1.3 cm).
It is printed in one piece with minimal material usage.
Print instructions:
nothing special, do as you like.
keep an eye on the long bridge. My printer is capable of doing that, but perhaps you need a bit support.
I use PolyMaker polyTerra sunrise orange for this print
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.