1 / 9
Funnel - Parametric (Fusion 360) - Easy! Examples attached.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Funnel - Create pretty much any funnel size by changing a few parameters in Fusion 360 (this is easy!)
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 182
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
Parametric Funnel - Create pretty much any funnel size by changing a few parameters in Fusion 360. New to Fusion 360 or design software? Give it a go! This is easy and fun! And Fusion 360 is FREE for personal use.
Example(s) attached.
Printing:
- Model is in the right orientation and doesn't need supports if you make sure that WidePartDiameter / WidPartHeight is less than 2 (ideally 1.5 depending on printer). This will make sure that the over hang is less than 45 degrees.
- I would change the Seam to random to prevent an ugly line running down the model - see on of the photos!
Changing Parameters in Fusion360:
- Open model (f3d file) in Fusion 360
- Click Modify - Change Parameters (Not every value works everywhere but defaults are added in the Comment section of the parameters to get back to something that does work)
- Don't want the handle? Click the ‘Eye’ in front of the handle to hide it
- Print? Click the drop down to the left of the Floppy icon on the left hand top. Select Export (or print but than you didn't need this little tutorial in the first place :-) ) and Export as STL file.
- Open STL file in your slicer