Handspindle whorl with triple spiral
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of two sizes of my celtic knotwork spindle whorls, the 60 mm and 100 mm sizes with a triple spiral design
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 470
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I wanted another design for my printable spindle whorls.
Like the originals, these print flat side down so I recommend a removable flex bed surface if possible.
The files are now titled by size/shaft size. These models are both sized for a 6mm shaft.
The100mm whorl is good for bulky yarn or large plying projects. It weights about 18 grams.
The60mm whorl is a smaller average size. Weight depends on the fill density.
There is no heavy version of this design yet.
These are compatible with the “hook for spindle.stl” in the files for handspindle whorl with celtic knotwork but you must uniformly scale the model, smallest dimension 5.7mm as these are only 6mm shaft size at this time.