1 / 5
Body Measurement Tool For Tape Measure - REMIX for 10mm retractable tapes. — zdjęcie 1
1 / 5

Body Measurement Tool For Tape Measure - REMIX for 10mm retractable tapes.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix with open edge and wider crimp slot to accommodate retractable measuring tapes.

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
238
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Loved the idea of this for tricky measurements like biceps and forearms where the other hand isn't able to assist.

But it doesn't work for my measures which are all 10mm with retractable hubs.

So I redesigned it to accommodate retractables. 

Also made the measurement indicator pointed for accuracy, and this can be marked with a permanent marker to help make it more visible.

I had to have a few goes tweaking the shape so that the indicator is accurate when the end tape crimp is sitting in the slot correctly, but now it's good to 1mm on the three different tapes I have available to test it on here.

Printing - I used PLA+ with all standard settings for 0.4mm nozzle and 0.2mm layers, 15% infill, nothing's critical. No adhesion or support - the tape-trap ledge should be printable without support, it does on my printer because Cura sliced it with the lines building out from the supporting stem, but if yours sags then you could support it.

Thanks to the original designer Grasseus for this great idea!

Please Like this model if you find it useful.

If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)