Radioshack RC Car Tire & Rim Assembly [PAID]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Tire & Rim assembly designed for a Radioshack 60-4116 RC Car.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Rim is designed for ABS
Tire is designed for TPU. I printed mine with 5 outside layers and 30% fill (which was probably a bit excessive) 0.2mm layer height.
Rim slides into tire with a bit of persuasion. Feel free to glue in place.
These parts were designed for a Radioshack 60-4116 ‘Sniper’ Radio Controlled (RC) Car, circa 1995. No replacement parts are available as far as I can tell. Design on rim and tires is a similar design to original. Tire OD is 3.5" (spike OD) / 3.0" (main body of tire) and tire width is 1.75" (see drawing for a couple more dimensions).
This is a PAID version of the design - you get STEP/SLDPRT files and the ability to change/modify the design. If you just want to download and print these parts, please take a look at the FREE version of this design which includes two versions of the STL files with 5 and 10 degree accuracy.