Tall Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What is there to say? It's 3D Benchy, but taller.
- Ocena
- 5 / 5
- Polubienia
- 142
- Pobrania
- 357
- Wydruki
- 6
- Wyświetlenia
- 1211
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I designed this for everybody who loves a good Benchy, but wishes they took much longer to print, required supports, and were significantly more likely to fail. Does that not sound good to you? You're the weird one!
I initially tried printing this bad boy with no supports. It went poorly! So I would strongly suggest using the provided breakaway support file. It's very easy to use:
- After dragging the “Tall Benchy” STL into your slicer, right click on the model, hover over Add Part, and click Load.
- Select the “Tall Benchy Imported Support” STL, and click Open.
- I also turned my Lift Height up to 1.0 mm in my Printer Settings and turned my print speed down to 60% on my printer to decrease the likelihood of print failures.
- It's that easy, make sure supports are turned off and you're ready to print.
I don't know if anyone will actually print this, but if you do, please leave a picture showing how it turned out. I'm always stoked to see people printing my work, even something as silly as this.