1 / 5
Aldarra Player Board (For 250mm x 250mm print beds ONLY) — zdjęcie 1
1 / 5

Aldarra Player Board (For 250mm x 250mm print beds ONLY)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3 part player board for Aldarra (Not faction specific) that will only fit large print beds

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a player board to hold the cards and large faction sheet (or ships instead). gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the cards and ships (without the large sheet), using up as little space as possible.

The player board has 2 ways of using it. Board 1 and 2 are for the ship cards, mini cards and 3 (plastic) order tokens. Board 3 can either be used to hold the large player sheet or all of the ships, fortresses and 4th order token. This is not a faction specific layout and should fit everything okay.

The player board is in 3 parts (maximum print size 244mm x 244mm) that are held together by 6 clips. I had to make it this size in order to fit the large player card.

I will be working on a smaller version for smaller print beds, but the large faction sheet will not fit, so it will be for ships. fortresses and order tokens only. I will have to make smaller player boards 1 and 2 as well for the cards.

 

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

 

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

 

Printing Instructions:

I (have not) printed these on my Ankermake M5 printer with Ankermake slicer Studio (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s)

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees)

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 20%

Supports: No

Skirt: No / Optional

Brim: No / Optional

Raft: No / Optional

 

Enjoy.

 

 

                                     https://www.buymeacoffee.com/tigertone

Tagi