1 / 1
Gimbal Protectors for Spektrum iX14+ and Compatible Models
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gimbal protectors for the Spektrum iX14+. May also fit other iX models (not tested).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gimbal protectors for the Spektrum iX14+. May also fit other iX models (not tested).
Application:
Place the gimbal protectors onto the gimbals from above.
Print Settings:
- Printer: Creality K1
- Nozzle: 0.4 mm
- Material: Creality Hyper PLA (black) with appropriate settings
- Walls: 3
- Infill: TPMS D-Cell, 15%
- Supports: Not required
Print Time for 2 Pieces:
Approx. 35 minutes.