1 / 2
Guards of Atlantis II - Tie breaker coin — zdjęcie 1
1 / 2

Guards of Atlantis II - Tie breaker coin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tie-breaker coin, for those of us with FOMO for the metal coin that was offered during the crowdfunding campaign!

Ocena
0 / 5
Polubienia
2
Pobrania
42
Wydruki
0
Wyświetlenia
209
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

A printable tie-breaker coin, offered in 2 flavors: a single model, or a 2-part model that you glue together. The latter is for if you don't want to worry about overhangs or printing at an angle with supports.

If printing with AMS, you could go into your slicer and color the layers that you want blue or orange, or just print it all in one color and paint it afterwards.

If printing the 1-part model, I recommend printing around 30 degrees, with some light support, and probably a brim.

Tagi