Grease gun mounts.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design for storing a grease gun on the wall.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 299
- Wydruki
- 2
- Wyświetlenia
- 1580
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple, support free mount to keep your grease gun stored away.
I have included all three iterations of this design.
1 has a 65mm opening and no support for the hose.
2 has a 62mm opening and has a small lip to support the hose.
3 has a 62mm opening and has a 20mm opening to the side to accept a LockNLube coupler. I also placed the mounting hole lower, to allow me to tip it to the side slightly for easier removal.
All three have an 8mm mounting hole with a 15mm inset one #1 and 2. # 3 has a 20mm inset.
This was designed around a Blue-Point YA728A grease gun, but should accept any standard size grease gun.
If you have any suggestions, please let me know.