HueForge Darth JarJar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Darth Jar Jar HueForge. 2 versions; 5 color is easier, and 6 color is more complex
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I used the 5 color as a prototype, and the 6 color as a Christmas present. The image came from Reddit, but I can't find it again to credit it – As I recall the original poster said it was AI generated.
I actually used ABS for this, but it was modelled as PLA.
5 colors, one change each; (this is the DarthJarJar.3mf)
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm
Swap Instructions:
Start with Black
At Layer #8 swap to Blue
At layer #13 swap to Red
At layer #19 swap to Yellow
At layer #23 swap to White for the rest
-----------------------------------------------------------
6 colors, multiple swaps (DJJ2.3mf)
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #13 (0.82mm) swap to Blue
At layer #17 (1.06mm) swap to Red
At layer #24 (1.48mm) swap to Black
At layer #25 (1.54mm) swap to Jade White
At layer #28 (1.72mm) swap to Red
At layer #30 (1.84mm) swap to Yellow
At layer #37 (2.26mm) swap to Beige
At layer #41 (2.5mm) swap to Jade White for the rest.