Anycubic i3 Mega Pro X-Axis cable chain mount (DDE only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic i3 Mega Pro X-Axis cable chain mount for direct drive converted machines
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This X-axis cable chain mount for the Anycubic i3 Mega Pro was designed for use with the cable chains in Anycubic I3 Mega - Cable Chains - All Axes by dmaMods. The mount included in the original did not fit the Pro version of the i3 Mega that I have, so I scratch built this version. It is intended to be used with Anycubic I3 Mega S rear bracket MK4 Carriage with cable chain by KrazeeKamikazee on a machine converted to direct drive extrusion.
The original used snap-on lugs to attach the chain, whereas this design uses pins. That change was made due to frequent breakage of the lugs during prototyping. The lugs are now very thick and should have little chance to break. You can resize the pins in your slicer if you have any issues with fitment. STEP files are also inlcuded in case you wish to mod these to suit your needs.
Original printed in ABS but PLA and PETG should also be fine