1 / 3
ALPAKA HUB CARDHOLDER MOD FOR PD SLING 6L — zdjęcie 1
1 / 3

ALPAKA HUB CARDHOLDER MOD FOR PD SLING 6L

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original clip was too bulky, I made this one to make it more compact and convenient to use.

Ocena
0 / 5
Polubienia
5
Pobrania
21
Wydruki
0
Wyświetlenia
628
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You need a flat plastic stick, gently pry and the fidlock clip will pop out of the clamp.
And you will need a 20mm wide fabric strap to sew the loop that connects to the printed clip.
You can print with any filament you like but I recommend printing with petg, it is durable and has good UV resistance.

I print with fuzzy skin mode, the parameters are as below to get the surface on the image.