Internal frame for Retro Monitor Pet Cave from lttstore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This frame is designed to add rigidity to your pet cave from ltt.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an internal frame for this product - https://www.lttstore.com/products/pet-cave
I designed and printed it so my cats won't crush the shape of a monitor and disturb my gf (pet cave is sitting on her table like double monitor setup)
If you have the same problem - here you go!
Tho it's a lengthy print with some assemble and hardware required
ASSEMBLY
You'll need to print:
2 of each frame pieces, one normal, the other mirrored (so the frontdown, frontup, backdown, backup)
24 threads and 12 threadcaps
Assembly is pretty straightforward, but you'll need some hardware - 24 m3x15 bolts. (you can also just glue the pieces, but it won't work with PETG)
Also, I recommend printing one test set of threads and caps to figure out your tolerances just right.