1 / 5
Aldarra Player Board (for 220mm x 220mm Print Beds - or larger) — zdjęcie 1
1 / 5

Aldarra Player Board (for 220mm x 220mm Print Beds - or larger)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3 part player board for Aldarra. (Print bed must be 220mm x 220mm or larger)

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a player board to hold the cards, ships, outposts, fortresses and plastic order tokens. gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the cards and ships (without the large sheet), using up as little space as possible.

This is not a faction specific layout and should fit everything okay.

The player board is in 3 parts (maximum print size 220mm x 220mm) that are held together by 6 clips.

 

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

 

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

 

Printing Instructions:

I (have not) printed these on my Ankermake M5 printer with Ankermake slicer Studio (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 250mm/s (Initial layer @ 50mm/s)

Nozzle Temperature: 230 Degrees (Initial layer @ 230 Degrees)

Bed Temperature: 65 Degrees (Initial layer @ 75 Degrees)

Infill: 20%

Supports: No

Skirt: No / Optional

Brim: No / Optional

Raft: No / Optional

 

Enjoy.

 

 

                                     https://www.buymeacoffee.com/tigertone

Tagi