Meisseli
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed electric screw driver
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Meisseli - 3D printed electric screw driver
Adapter for 4mm and 6.35mm bits included, along with Build123D code for customization.
Stuff needed
- 6x M2 x 6mm countersunk (pcb and case mount)
- 2x M1.6 x 4mm countersunk (motor mount)
- 6x M2 heat set inserts, the one near the motor needs to be short
- a motor like https://www.aliexpress.com/item/1005005499465760.html (type A)
- 18650 battery, use one with a protection PCB included unless you feel like doing something fancier with the motor control PCB. The battery bay is longer to accompany such a battery.
- a switch, two press buttons, a spring and such miscellaneous stuff
Optional
Motor control
I had an old LB1630 driver around, winged a franken-vero-board with two pull-down 1206 SMD resistors and a cap. There's a sketchy sketch as veroboard.gnumeric. You might want to do something saner instead. The thing is a bit underpowered, it could use a circuit to up the voltage. That would need a redesign to make it fit though, maybe in mk2.
Warranty
None whatsoever, I'm not responsible for anything you do.