Magic the Gathering Ultimate Guard Desiccant Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a desiccant holding insert for the Ultimate Guard Boulder 100+ Deck Box.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a desiccant holding insert for the Ultimate Guard Boulder 100+ Deck Box. It fits perfectly in a Boulder 100+ deck box with a 100 card, single sleeved, commander deck.
I had been adding desiccant packets to my deck boxes in order to keep my cards from fighting the humidity. I was also using inserts to help press my cards together and keep them flat. I finally thought to myself, “why not both”.
These inserts are mainly sized for the desiccant packs that come with rolls of filament (specifically Prusament), but will fit many others. They are designed to be press fitted, and to stay in place on; however, if you have tolerance issues, feel free to add a few drops of CA glue in the holds to make the lid permanent.
Additionally, I believe they may also work with Silica Gel Balls, as the slots are angled and small enough to keep the balls in side.
If you have any questions or improvement ideas, please feel free to share.
Thank you.