Pusher folding propeller limiter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is prop limiter for following components:Aeronaut CAM Carbon 10x6CCCN 95030039https://www.hacker-motor-…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is prop limiter for following components:
Aeronaut CAM Carbon 10x6 CCCN 95030039 https://www.hacker-motor-shop.com/aero-naut-camcarbon-10x6-folding-propeller.htm?shop=hacker_e&SessionId=&a=article&ProdNr=10648300&p=1960
Center piece for turbo spinner CCCN 95030039 35/8mm - Welle 4,0mm https://www.hacker-motor-shop.com/center-piece-for-turbo-spinner.htm?shop=hacker_e&SessionId=&a=article&ProdNr=19940100&p=4737
Please use it in order to avoid catastrophic damage to your model and prevent injuries! If one blade folds too much back an towards to the other, your center of mass will be ex-centered and centrifugal forces will break your motor mount, wires, and everything connected to it!
Print Settings
Printer Brand:
Zortrax
Printer:
M200
Yes
Supports:
Yes
200
Infill:
90
Notes:
It will be hard to remove supports but it is possible. After mounting trim by scalpel until it is OK.
Category: R/C Vehicles