Mini Eleiko Plate Coasters | Dual Color | without AMS etc. | weight plates | Coaster

Level up your coffee table competition platform with these Mini Eleiko Plate Coasters—now printable in dual color without an AMS! Just a simple filament swap mid-print, and boom, you've got plates that look as strong as your lifting game 💪 (even if your max is still "in progress").

Get +1 DOT on your total every time you print one or like this remix!

Short Description:

• Optimized for flat printing with lettering on the build plate
• Overhangs adjusted for better printability
• Designed for PETG/ABS to withstand higher temperatures - heat-resistant – great for hot drinks☕
• Print in PLA for cold drinks only! 🧊

Full Description:

These models are designed for easy dual-color printing, even on a single-extruder (color) machine. The lettering is placed directly on the build plate, allowing for a color swap mid-print. To achieve this, first print the lettering, then pause (leave build plate heating on), switch the filament, and start the second part of the print—ensuring z-hop is enabled (~1mm). Overhangs have been adjusted for flat printing. While dual-color printing in this way requires some experience, it’s completely doable with the right settings.

attempt at your own risk

Especially keep in mind what your printer is doing at the start ("start Z-hop" with the point as shown in the picture) and keep in mind to maybe disable some starting routines.

Printed in PETG/ABS for enhanced durability and heat resistance, making them ideal for hot drinks. If you want to print just one, center both prints so the lettering aligns exactly where it should be. If you're printing multiple at once, make sure each piece is positioned carefully to keep the lettering in place.

Not IPF approved!

Just a small flex so u know u gain DOTs https://www.openpowerlifting.org/u/maximilianhakes … kinda cringe