270 Degree Hinge for Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the stock hinges with hinges that allow the door to be opened completely.
- Ocena
- 4,898 / 5
- Polubienia
- 1132
- Pobrania
- 9694
- Wydruki
- 49
- Wyświetlenia
- 29 571
- Oceny
- 49
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Required Stls:
- 1x hinge_upper
- 1x hinge_lower
- 1x arm_upper
- 1x arm_lower
- 2x nut_block
- *4x plastic_spacer
*The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass.
Required Hardware:
- 4x m3 8mm Socket Cap Screws (for side panel)
- 4x m3 12mm Socket Cap Screws (for glass panel)
- 2x m3 30mm Socket Cap Screws (for hinges)
- 6x m3 Nuts
- 4x m3 washers thickness between .5mm and .7mm (for arms)
- 4x washers from existing hinge
Installation instructions can be found in the files section if you need them. It seems newer batches of the CC have the hinges glued to the door. If yours are glued you will need to unscrew the original hinges before you can remove the door.
Notes: Print the plastic spacers with wall print order outer to inner, the rest can be printed inner to outer for better overhangs. .2 layer height
Some addons for the hinge can be found here: https://www.printables.com/model/1213120-extras-for-270-degree-hinge