grow tent vent light restrictor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ventring which restricts light from leaking from the growarea Normally you have a mesh restricting dirt, hair, dust.…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 2080
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
ventring which restricts light from leaking from the growarea
Normally you have a mesh restricting dirt, hair, dust.
But not light.
Normally these come with insert to block of not wanted vents.
Cut hole size of vent in it and mount.
You can probably hardmount them everywhere.
will upload pictures later when printed.
I printed this in PLA @ 120% size
Outer diameter (not radius) is 10cm, so it makes it easy scalable.
4 toplayer
3 shell layer
5 bottom layer.
Vent itself 10% infill
The ring 15% infill
0.28mm layerheight at 0.4mm nozzle.
!!! Support: Treesupport only touching buildplate !!!
The vent has pillars in them to help with bridging.
I had no issues with the bridging, not even on the first layer. max bridging needed is roughly 30mm
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.2
Infill:
25%
Filament:
Polymaker Polyflex PLA Black
Category: Hobby