Spinning Cubbus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
5,23 € – 6,39 € netto (bez VAT)
Dla pliku: Spinning Cubus.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 5,81 € netto (środek widełek).
- Masa podana przez autora
- 82 g
- Czas druku podany przez autora
- 5,36 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This low poly ball on stand that I designed to practice print in place model.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This low poly ball on stand that I designed to practice print in place model.
The ball spins around the the shaft and it's a fun fidget to have on your desk.
I designed this in onshape using various techniques.
This was printed and designed for FDM 3D Printer.
You will need supports for this model to specifically elevate the ball and keep in place in the center.
I provided support settings in the pictures and you can either use tree supports to prop up the ball above the stand or use snug normal supports for this.
Once it's printed, use precision pliers to pull the supports off. If you the settings provided they will come of really easily.