Viking Arm Thin Base Pad and Lifting Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thin base pad and lifting pad for the Viking Arm jack. Provides protection to the material with only 2mm added height.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I have the Viking Arm jack (https://vikingarm.com/), and it is great for lifting heavy objects with precision! The original base pad and lifting pad are good accessories, but they add more than 15mm extra height. This is a thin version of the base pad and lifting pad from Viking Arm. The base- and lifting pad only adds 2mm, allowing the jack with protection to fit with only 8mm clearance.
The original pads have a soft rubber material for protection of surfaces. This would be the preferred alternative if you have the required clearance and will also provide better protection/be more durable. If not, this might be a good alternative, providing some protection from the bare metal.
Let me know if the tolerances are OK or if it needs improvements. It fitted very well on my own jack.
Releases
| 2025.03.06 | v1.6 | Initial Release |
Printing notes
Print in a durable material. I used Add:north HT-PLA with good result. The base plate needs supports as shown below:
