1 / 8
FNIRSI-1014D Osciloscope French Cleat Holder — zdjęcie 1
1 / 8

FNIRSI-1014D Osciloscope French Cleat Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

French cleat holder for the FNIRSI-1014D Oscilloscope

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
0
Wyświetlenia
220
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This model is pretty big. The french cleat part is a separate body that needs to be screwed into the main body, so it's at least two parts. But since those parts are very long, I included both versions, one being a single body, and one already pre-cut in parts that fits a 25cm x 21cm printing bed. You'll also need M4 inserts and counter-sunk 20mm long M4 screws.

Tagi