1 / 1
Meanwell lrs 350 powersupply shroud (Sovol SV06 ace) — zdjęcie 1

Meanwell lrs 350 powersupply shroud (Sovol SV06 ace)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

power supply shroud that fits the meanwell lrs 350 series.

Ocena
5 / 5
Polubienia
21
Pobrania
75
Wydruki
5
Wyświetlenia
891
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Simple shroud for a meanwell lrs350 power supply, 100mm tall, 68mm extends below the power supply, 4.75mm (based on 5mm, additional tolerance brings it to 4.75) wall thickness (except for the flush side)

Notes:

Uses existing hardware from the original powersupply shroud/mounting solution, however it will work with whatever m4 hardware you have for mounting, and m3 for the plug.

I recommend flipping the file vertically so that the wide slot (the bottom) is sitting on the bed, to minimize support, plug hole needs support, ventilation holes and screw holes may also need support.

The screw holes for mounting the powersupply are a tadbit on the small size, you may want to increase them a little, however they did work when i printed it (they were just a little tighter than ideal) everything else went perfectly fine. The screw holes for mounting the power plug are threaded by the screws, i would recommend running the screws in first, before installing the plug to make it easier, try not to over tighten them as it's just a through hole.

Designed for my sv06 ace to replace the original power supply which has no fan control, with a quality unit, and a better shroud that moves the plug to the back, as well as makes it more compact, and minimizes cooling impedance. Designed around the general dimensions of the plug, so if you use this for a different use case, i would suggest finding a plug with similar overall dimensions, less than 30mm wide, and 50mm long, screw spacing at 56mm center to center, and total plug length at about 65mm, or changing the design to implement a different plug.

Tagi