1 / 1
Ripples on a pond (MMU and color print) — zdjęcie 1

Ripples on a pond (MMU and color print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design can be printed on a MMU or as a color print.

Ocena
5 / 5
Polubienia
16
Pobrania
76
Wydruki
1
Wyświetlenia
395
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I converted the svg file from Laser cut ripples on a pound mc escher by mistercrunch - Thingiverse and then added a bottom to this model.

For the MMU version I cut a box with the model in Tinkercad and then added it back so it could fill in the design.

The attached picture is the MMU version and was printed face down. Printing face down gives the effect of ironing, but your build plate must be in good shape, and you must get a good first layer since that is what is seen. If printed face up, I would recommend using ironing, although that comes at the expense of a longer print time.