FTC Clip Inspection Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Clip Inspection Tool for use in the 2024-2025 First Tech Challenge Season “Into The Deep”.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Clip Inspection Tool for use in the 2024-2025 First Tech Challenge Season “Into The Deep”. It is to be used to assist in quick inspection of specimen clips per the Field Compliance Checklist found at https://ftc-resources.firstinspires.org/file/ftc/game/compliance-checklist
The sample as shared is “Fancy”, but I've also included several simpler variations as well as the raw step file for those that want to tailor it to their own desires. Dual sided for lefties and righties ✋🤚. All the colored regions are separate bodies so you can mix and match for your own colors.
The tool is sized to fit along the flat opening of the clip and make contact with the curved “catch”. The colored regions correspond to the following (note, sizes are in inches as this is how the specification is written:
Black line: Centered on 0.75" (19.05mm) nominal ideal size
Green and yellow zones: Clip is within the +/- 0.125" (3.18mm) tolerance with yellow giving a visual alert of being close to out of spec. The Green-Yellow transitions are at 0.837" (21.26mm) and 0.663" (16.84mm).
Red Zone: Over/Under Size.
Four color model eliminates the logo and merges yellow region into green
Plain model replaces color boundaries with a simple chamfer groove at 0.75" and +/- 0.125".
Also stored as a pre-colored 3mf file over at Makerworld.